ESP32 with a water level sensor

ESP32 with a water level sensor:Hardware Setup:Gather the necessary components:ESP32 development boardWater level sensor moduleJumper wiresBreadboard (optional)Power supply (3.3V or 5V)Connect the water level sensor to the ESP32:Connect the VCC pin of the sensor to the 3.3V or 5V output of the ESP32.Connect the GND pin of the sensor to the ground pin of the ESP32.Connect the output pin of the sensor (usually labeled "OUT") to a digital input pin on the ESP32 (e.g., GPIO13).Software Setup:Install the Arduino IDE: Download...