05Sep

ESP32 with a BMP280 sensor

ESP32 with a BMP280 sensor:Hardware Setup:Gather the necessary components:ESP32 development boardBMP280 sensor moduleJumper wiresBreadboard (optional)Power supply (3.3V or 5V)Connect the BMP280 to the ESP32:Connect the VCC pin of the BMP280 to the 3.3V or 5V output of the ESP32.Connect the GND pin of the BMP280 to the ground pin of the ESP32.Connect the SCL pin of the BMP280 to the SCL pin of the ESP32.Connect the SDA pin of the BMP280 to the SDA pin of...

ESP32, IoT0 Comments 0
Read more...
05Sep

ESP32 with an MQ-135 gas sensor

ESP32 with an MQ_135

Hardware Setup:Gather the necessary components:ESP32 development boardMQ-135 gas sensor moduleJumper wiresBreadboard (optional)Power supply (3.3V or 5V)Resistor (e.g., 10kΩ)Connect the MQ-135 sensor to the ESP32:Connect the VCC pin of the sensor to the 3.3V or 5V output of the ESP32.Connect the GND pin of the sensor to the ground pin of the ESP32.Connect the output pin of the sensor (usually labeled "OUT") to an analog input pin on the ESP32...

ESP32, IoT0 Comments 0
Read more...
05Sep

ESP32 with a 0.96-inch OLED display

ESP32 with a 0.96-inch OLED display:

Hardware Setup:Gather the necessary components:ESP32 development board0.96-inch OLED display moduleJumper wiresBreadboard (optional)Power supply (3.3V or 5V)Connect the OLED display to the ESP32:Connect the VCC pin of the OLED display to the 3.3V or 5V output of the ESP32.Connect the GND pin of the OLED display to the ground pin of the ESP32.Connect the SCL pin of the OLED display to the SCL pin of the ESP32.Connect the SDA...

ESP32, IoT0 Comments 0
Read more...
05Sep

ESP32 with a DHT11 sensor module

ESP32 with a DHT11 sensor module:

Hardware Setup:Gather the necessary components:ESP32 development boardDHT11 sensor moduleJumper wiresBreadboard (optional)Power supply (3.3V or 5V)Connect the DHT11 sensor to the ESP32:Connect the VCC pin of the sensor to the 3.3V or 5V output of the ESP32.Connect the GND pin of the sensor to the ground pin of the ESP32.Connect the data pin of the sensor (usually labeled "D") to a digital input pin on the ESP32 (e.g., GPIO13).Software Setup:Install the...

ESP320 Comments 0
Read more...
05Sep

ESP32 with a capacitive soil moisture sensor

ESP32 with a capacitive soil moisture sensor:Hardware Setup:Gather the necessary components:ESP32 development boardCapacitive soil moisture sensor moduleJumper wiresBreadboard (optional)Power supply (3.3V or 5V)Connect the soil moisture sensor to the ESP32:Connect the VCC pin of the sensor to the 3.3V or 5V output of the ESP32.Connect the GND pin of the sensor to the ground pin of the ESP32.Connect the analog output pin of the sensor...

ESP320 Comments 0
Read more...
Our Mobile App NEW